Bit Logic Instruction Description

1. Normally Open (XIC)

• Normally Open contact work as a 0 state means energy flow cannot transfer so output off.
• When we provide Input and state change from 0 to 1 and output on.

Normally Open 

2. Normally Close (XIO)

• Normally Open contact work as a 1 state means energy flow transfer continuous output on.
• When we provide Input and state change from 1 to 0 and output off.

Normally Close

3. Positive Edge

• Positive Edge use for detect signal change state of 0 to 1.
• When it detect a change in the input signal from 0 to 1 energy flow transfer only of some time that signal change its state from 0 to 1.
• After energy flow can not transfer means when positive edge detect output on and off instantly.

Positive Edge

4. Negative Edge

• Negative Edge use for detect signal change state of 1 to 0.
• When it detect a change in the input signal from 1 to 0 energy flow transfer only of some time that signal change its state from 1 to 0.
• After energy flow can not transfer means when negative edge detect output on and off instantly.  

Negative Edge

5. Output Energize (OTE)

• Output Energize Instruction is an output coil. 
• Output Energize Coil state is depend on input state behavior.
• IF Input activate at that time output Coil energize on and Input not active at that time output coil energize off.

Output Energize

6. Output Latch (OTL)

• Output Latch instruction provide inbuilt latching function.
• When we provide power at Input side and Output Coil On and when we release power from input side and output coil remain on. 

Output Latch

7. Output Unlatch (OTU)

• Output Unlatch instruction provide inbuilt unlatching function.
• When we provide power at Input side and output coil off.
• This instruction use for deactivate output coil.

  

  Output Unlatch